HT436 Motor Speed Control (For/Rev) / Electronics DIY Hobby Kit Set

Facebook is in

https://www.facebook.com/569011719789428/photos/a.890930790930851.1073741834.569011719789428/890943577596239/?type=3&theater

Introduction

HT 436  is a Motor Speed Controller with Forward and Reverse direction 

This kit allows controlling the speed of a DC motor in both the forward and reverse direction.

The range is from fully OFF to fully ON in both directions.The direction and speed of the DC motor is controlled using a single potentiometer. Turning the pot in one direction causes the motor to start spinning. Turning the pot in the other direction causes the motor to spin in the opposite direction. The center position on the pot is OFF, forcing the motor to slow and stop before changing direction. The maximum motor voltage is 32V and the maximum current is 10A. 

* For DC motors 12 to 32 Volts DC @ 5 Amps. Mosfets can handle up to 47Amps, but PCB trace capacity would have to be beefed up with some hookup wire in a few places.

* Requires operating voltage of 6 – 32 VDC

Note

• You need to have a soldering skill and basic knowledge of testing
• For any inquiry or other technical problem please email us!
• Email: Nikkoleofockxing@hotmail.co.uk